| Normal Troubleshooting for Vertical Pouch Packaging Machine
368
post-template-default,single,single-post,postid-368,single-format-standard,ajax_fade,page_not_loaded,,qode-title-hidden,footer_responsive_adv,qode-theme-ver-16.8,qode-theme-bridge,qode_advanced_footer_responsive_1000,qode_header_in_grid,wpb-js-composer js-comp-ver-5.5.5,vc_responsive

Normal Troubleshooting for Vertical Pouch Packaging Machine

Normal Troubleshooting for Vertical Pouch Packaging Machine

%e6%9c%aa%e6%a0%87%e9%a2%98-1

 

F= Failure        R. = Possible reason        S = Possible solution

 

F1. No power

R1. Is the power plug connected to the power supply?

S1. Connect the power plug onto the power supply.

 

F2. Power on, but machine doesn’t start working.

R2. Is the power plug connected tightly and properly?

S2. Check and connect the power plug tightly and properly onto the power supply.

 

 

F3. Power on, but machine doesn’t start working.

R3: Is the “emergency-stop” pressed down?

S3: Check and release the “emergency-stop”

 

F4. Though “emergency-stop” pressed down, machine doesn’t stop working.

R4. Machine program mistake

S4. Turn off power and restart.

 

F5. Machine stops working due to “eye-mark” detecting mistake.

R5. Is the “eye-mark” sensor set properly?

S5. Check and adjust the “eye-mark” sensor.

 

F6. Machine stops working due to “eye-mark” detecting mistake.

R6. Is the bag length setting correct?

S6. Check and confirm the bag length set is correct.

 

F7.  Temperature indicator doesn’t show temperature increasing

R7.  Is the heater working well?

S7.  Replace the heaters.

 

F8.  Temperature indicator doesn’t show temperature increasing

R8.  Is the thermocouple broken?

S8. Replace new thermocouple

 

F9.  Temperature indicator doesn’t show temperature increasing

R9.  Temperature indicator is broken.

S9.  Replace new temperature indicator.

 

F10.  Temperature indicator doesn’t show temperature increasing

R10.  Is the fuse broken?

S10. Replace new fuse.

 

F11.  Temperature indicator doesn’t show temperature decreasing

R11.  Is the thermocouple loose?

S11.  Check and re-fix the thermocouple.

 

F12.  Temperature indicator doesn’t show temperature decreasing

R12.  Is the relay broken?

S12  Replace new relay.

 

F13.  Temperature indicator doesn’t show temperature decreasing

R13.  Is the thermocouple broken?

S13.  Check and replace the thermocouple.

 

F14.  Film pulling motor doesn’t work.

R14.  Is the film pulling motor broken?

S14.  Check and replace new film pulling motor.

 

 

 

F15.  Film pulling motor doesn’t work.

R15.  Is the film-pulling proximity switch broken?

S15.  Check and replace new proximity switch

 

F16.  Film pulling motor doesn’t work.

R16.  Is the relay on power board broken?

S16.  Check and replace new relay.

 

F17.  Film pulling motor doesn’t work.

R17.  Any wire broken?

S17.  Check wire connections and fix.

 

F18.  Sealing is not tight enough.

R18.  Is the temperature set not high enough?

S18.  Check and set a higher temperature to try.

 

F19.  Sealing is not tight enough.

R19.  Is the sealer matching well? Is the sealer pressure enough?

S19.  Check and adjust the sealer matching, and sealer pressure.

No Comments

Sorry, the comment form is closed at this time.